H1 Cubicle Rise & Fall Hinge

More Views

H1 Rise & Fall Cubicle Hinge


Availability: In stock

H1 Rise & Fall Cubicle Hinge


The H1 hinge is available to suit panel thicknesses over 17mm. The hinge is fitted to the edge of the door by a 6mm wood/metal dowel, this requires the edge of the door to be pre-drilled prior to fitting. The fascia component is simply screwed into the back of the fascia using three standard woodscrews. The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between. A hidden screw is fitted to each hinge to prevent the doors from being lifted off, where immediate access is required these screws may be discarded so the door can be easily lifted off. This H1 Rise & Fall Cubicle Hinge is part of a range of Cubicle systems available from Hoeys DIY and is available for overnight delivery throughout Ireland.

Additional Information

Manufacturer Alm Products

H1 Rise & Fall Cubicle Hinge